Ultra_Compressor Co.,Ltd
    Home
Change to Thai   Change to English US
Language
Our Products
Pneumatics (นิวแมติกส์)
Screw Air Compressor
Piston Air Compressor
High Pressure Compressor
Filter for Compressor
Mann Filter
Donaldson Filter
Refrigerant Air Dryer
Element Filter & Air Filter
Ultra Filtration, Filter Elements, Housing Filter

Ultra Filtration LogoFilter Elements & Housing filter

Ultra Filtration offers a one-stop source solution to all compressed air element requirements. We used world recognized supplies of filtration from GERMANY

Ultra filtration, the best quality air treatment products.
  • High flow possibilities
  • 3-5.5 time larger filtration area
  • Higher dirt holding capacity
  • Lower pressure drop
  • Lower maintenance costs
  • Long life times
  • Polyester needle felt max. temp. 120°C
    		•

    Flow Rate 0.8 M/min -150 M/min

    Alternative with : Domnick Hunter, Zender, Ultra Filter, Hiross, Hankison, Orion, Atlas Copco, CTA, Friulair etc…


    To ensure the highest performance efficiency, elements are put to test on our facility which employs a mono-dispersed aerosol to challenge the elements and a near forward light scattering technique to measure and confirm particle retention efficiency.

    All compressed air filter elements are manufactured in accordance with ISO 8573.1:2001 (E)

    Compressed Air Quality to ISO 8573 Part 1:2001
    CLASS Maximum number of Solid Particle per m3 Water Pressure Dewpoint °C IOIL mg/m3
    0.1-0.5 um 0.5-1.0 um 1.0-5.0 um
    1 100 1 0 -70 0.01
    2 100,000 1,000 10 -40 0.1
    3 - 10,000 500 -20 1
    4 - - 1,000 3 5
    5 - - 20,000 7 25
    6 - - - 10 -

    SPECIFICATION :
    SPECIFICATION (standard) X25 (25 Micron) X3 (3 Micron) X1 (1 Micron) XA (0.01 Micron) AC (Activate Carbon)
    Maximum partical size to ISO 8573.1 class 4 3 2 1 1
    Maximum Oil content to ISO 8573.1 class 5 4 2 1 1
    Particle removal 25 micron 3 micron 1 micron 0.01 micron N/A
    Maximum oil carryover at 20°C(68°F) 10 mg/m 10 ppm 3 mg/m 3 ppm 0.1 mg/m 0.1 ppm 0.01 mg/m 0.01 ppm 0.003 mg/m 0.003 ppm
    Maximum temperature 120°C 248°F 120°C 248°F 120°C 248°F 120°C 248°F 25°C 77°F
    Pressure loss-clean & dry 30mbar 0.4psi 0mbar 0.6psi 75mbar 1.1psi 100mbar 1.5psi 75mbar 1.1psi
    pressure oil saturated 50mbar 0.7psi 75mbar 1.1psi 150mbar 2.2psi 300mbar 4.4psi see notes
    pressure loss-change element 400mbar 6psi 400mbar 6psi 400mbar 6psi 400mbar 6psi see notes
    Maximum recommended pressure differential for element change - - 340-400 mbar 5-10psi - - - - - -
    Element end cap HIGH GRADE ALUMINIUM